Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Stator Winding Removal from Housing

Cummins/Onan — Stator Winding Removal from Housing

For these Cummins/Onan models: GS-107-AC, J120-8/967F, J120-S/967F.

Browse Cummins/Onan generators & specs →

Before you start

  • Use wood block when hammering to prevent damage to the winding

Procedure

  1. Be sure wiring is released from clamp before proceeding
  2. Separate the stator winding from the housing by pressing (normal method)
  3. Alternatively, hammer out using wood block at outside metal edge to prevent damage

Tools required

  • Wood block
  • Press or hammer

Source: manual:HOL-GAR GS-107-AC.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.