Cummins/Onan — Starting the Generator Set — Using the Recoil Starter
Operation
From a Cummins/Onan operator's manual covering: P4500, P5000E, P5000e. Check it applies to your exact model before use.
Applies to: Cummins/Onan P4500, Cummins/Onan F7RTC engine
Procedure
- Open the fuel valve (Figure 4).
- Pull the choke rod out to close the choke if the engine is cold (Figure 5).
- Check that the Start/On/Off switch is in the On position.
- With one hand on the generator, grip the recoil handle and pull it out smoothly and quickly. Repeat as necessary.
- Gradually push the choke rod in as the engine warms up.
- Let the engine warm up a few minutes before connecting tools or appliances.
Full service-parts list: Cummins/Onan P4500 →
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.