Cummins/Onan — SERVICE AND MAINTENANCE

For these Cummins/Onan models: 1400, 2.0UF-232S/32.

Browse Cummins/Onan generators & specs →

Procedure

1. 7).
2. 1. Remove the end cover and band to allow access
3. 2. Loosen the four cap screws holding the brush rig
4. 3. Mark the new brush rig in the same location as
5. 4. After you have made sure the brush rig is free to
6. 5.
7. 6.
8. 7.
9. 9.
10. 10.
11. 1. Remove the sheet metal end cover.
12. 2. Remove all brushes and springs.
13. 3. Remove the hex screws holding the end plate at

Source: manual:943-0004 Onan UF Battery Charger Manual(3-1077).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.