Cummins/Onan 3200 Series — Series

Before you start

• This document contains mixed page sizes (8.5 x 11 or 11 x
• S
• SAFETY INSTRUCTIONS
• instructions that should be followed during
• s.
• This symbol refers to a hazard or un-
• This symbol refers to a hazard or un-
• around hot manifolds,
• when working on electrical
• S
• s and carefully observe all
• s in this manual.
• Incorrect service or replacement of
• s, on pages iii and
• ” signal is sensed by the PCC (for
• message. The control will remain active
• message and start the 10 minute
• indicator is on).
• STATUS INDICATORS
• d as either “re-
• levels and
• ,
• Status Indicator: This yellow lamp is lit
• condition.
• indicators
• and shutdown messages after the
• message, the 0/Manu-
• condition.) To acknowledge a
• Status Indicator is lit. (This
• and
• /Shutdown
• or Shutdown status indi-
• lamp is used to indicate the start of a
• lamp will remain on for 2
• lamp in-
• LED:
• ous conditions to the oper-
• s which will result in severe personal in-
• or un-
• or un-
• .
• ous voltages can flow from the generator set
• .