Cummins/Onan RV QD 3200 — Reassembling Engine/PMA Assembly
Repair & overhaul
For the Cummins/Onan RV QD 3200, from the Cummins/Onan service manual.
Applies to: Cummins/Onan HDZAA, Cummins/Onan RV QD 3200
Procedure
- Tighten the engine mounting bracket bolts (to engine) to 14 ft−lbs (19 N−m).
- Tighten the engine mounting isolator bolts (to generator set base) to 10 ft−lbs (14 N−m).
- Remount the muffler.
- Reconnect the fuel lines.
- Tighten the engine harness connector screws to 10.6 in−lbs (1.2 N−m).
- Tighten the housing screws to 27 in−lbs (3 N−m).
Specs & values
- 14 ft−lbs (19 N−m)
- 10 ft−lbs (14 N−m)
- 10.6 in−lbs (1.2 N−m)
- 27 in−lbs (3 N−m)
Full service-parts list: Cummins/Onan HDZAA →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.