Cummins/Onan RSS100 / RSS200 — Final Inspection and Cleanup
Maintenance · Transfer switch
For the Cummins/Onan RSS100 / RSS200, from the Cummins/Onan service manual.
Browse Cummins/Onan generators & specs →
Before you start
- Do not use a blower to remove debris.
Procedure
- Inspect all wiring to be certain that all cabled connections are correct.
- Verify all generator start low voltage signal connections are correct.
- Verify wiring does not interfere with switch operation and is not damaged.
- Use a vacuum cleaner to remove any dust, filings, chips, or debris from the cabinet.
- Check the lug torque values of the power connections.
- Double check power supply voltages match the voltages listed on the nameplate.
- Make sure all covers and barriers are installed and properly fastened.
Tools required
- Vacuum cleaner Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.