Cummins/Onan RGA-IN1 — Wiring Harness Check
Testing & diagnosis
For the Cummins/Onan RGA-IN1, from the Cummins/Onan service manual.
Browse Cummins/Onan generators & specs →
Procedure
- Inspect all wires for breaks, loose connections, and reversed connections.
- Remove wires from terminals at each end and check each wire end to end for continuity or opens.
- Check each wire to other wires and to ground for possible shorts or insulation breaks.
- Reconnect or replace wires/harness according to applicable wiring diagram.
Tools required
- ohmmeter Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.