Cummins/Onan — Remove and Secure Access Cover
Maintenance
From a Cummins/Onan service manual covering: 2.0 KV, 2.3 KV, 2.5 KV, 2.8 KV. Check it applies to your exact model before use.
Browse Cummins/Onan generators & specs →
Before you start
- Do not operate the genset with the access cover removed.
Procedure
- Slide the latches up and pull the cover outward from the bottom.
- Lower the cover to remove it from the housing.
- Position the tabs on the top of the access cover in the openings on the housing.
- Slide the latches up and push the bottom of the cover in place.
- Hold the cover firmly while releasing the latches to secure it.
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.