Cummins/Onan — Raw Water Pump - Replace / Rebuild
Repair & overhaul
From a Cummins/Onan service manual — check it applies to your exact model before use.
Browse Cummins/Onan generators & specs →
Procedure
- Disconnect battery cables, engine wiring harness, fuel lines, exhaust hose, coolant hoses
- Drain and refill engine fluids
- Remove soundshield
- Remove raw water pump
- Clean and visually inspect or replace pump housing
- Replace cover and gasket, impeller, seal
- Install pump
- Test run unit
Specs & values
- SRT 08-207: 1.0 hours at Accessibility Code B
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.