Home›Repair guides›Cummins/Onan›Adding Engine Oil after Reassembly

Cummins/Onan QG7000i DF — Adding Engine Oil after Reassembly

Maintenance

For the Cummins/Onan QG7000i DF, from the Cummins/Onan service manual.

Applies to: Cummins/Onan RV Generator Set

Before you start

  • Too little oil can cause severe engine damage.

Procedure

  1. Refill with 2.7 qts (2.4 liters) of oil.
  2. Check and add or drain oil as necessary.
  3. Recheck level after a few minutes; oil fills slowly.

Specs & values

  • 2.7 qts (2.4 liters)

Full service-parts list: Cummins/Onan RV Generator Set →

Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →