Cummins/Onan — Positioning a Generator Set Using a Forklift Truck
Installation
From a Cummins/Onan service manual covering: C400 D5e, C400D5, C450 D5e, C450 D6e, C450D5, C450D6, C500 D5e, C500 D6e, C550, C550 D5, QSX15. Check it applies to your exact model before use.
Applies to: Cummins/Onan C400 D5e, Cummins/Onan C450 D5e, Cummins/Onan C450 D6e, Cummins/Onan C450D5, Cummins/Onan C450D6, Cummins/Onan C500 D5e, Cummins/Onan C500 D6e, Cummins/Onan C550 D5, Cummins/Onan QSx15, Cummins/Onan QSX15-G8/G9 engine
Before you start
- Do not attempt to lift a generator set with an undersized forklift truck.
- Transportation and handling by forklift trucks must only be undertaken by suitably trained and experienced personnel.
Procedure
- Position the arms of the forklift under the frame or pallet, making sure the mainframe is resting on the arms.
- Lift and handle the equipment slowly.
- Set down the generator set in its final position slowly.
Tools required
- forklift truck Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Cummins/Onan C400 D5e →, Cummins/Onan C450 D5e →, Cummins/Onan C450 D6e →, Cummins/Onan C450D5 →, Cummins/Onan C450D6 →, Cummins/Onan C500 D5e →, Cummins/Onan C500 D6e →, Cummins/Onan C550 D5 →, Cummins/Onan QSx15 →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.