Home›Repair guides›Cummins/Onan›Cleaning the Air Filter

Cummins/Onan P9500df — Cleaning the Air Filter

Maintenance

For the Cummins/Onan P9500df, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan P9500df

Before you start

  • Never use gasoline or flammable solvents to clean air filter

Parts for this job

  • A058U975 Air filter eBay

Part numbers from the service-parts list for Cummins/Onan P9500df. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Turn off generator and let cool for several minutes
  2. Move generator to flat, level surface
  3. Unclip clips on top and bottom of air filter cover
  4. Remove black coarse air filters
  5. Wash foam air filter elements in household detergent soap and warm water, slowly squeeze to clean
  6. Rinse in clean water with slow squeezing action
  7. Dispose of used soap solution properly
  8. Dry air filter elements with slow firm squeezing action
  9. Coat dry air filters with clean engine oil
  10. Squeeze filters to remove excess oil
  11. Install filters back into unit: gray (fine) filter first, then black (coarse) filter outside
  12. Install air filter cover and secure assembly

Full service-parts list: Cummins/Onan P9500df →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →