Cummins/Onan OT-A-4060A / OT-C-10050C — Manual Operation of the Transfer Switch
Operation
For the Cummins/Onan OT-A-4060A / OT-C-10050C, from the Cummins/Onan service manual.
Browse Cummins/Onan generators & specs →
Before you start
- AC power within the cabinet and the rear side of the cabinet door presents a shock hazard that can cause severe personal injury or death.
- Automatic transfer switch operation results in rapid movement of the manual operator handles and presents a hazard of severe personal injury. Keep hands clear of handles when switching back to automatic operation.
Procedure
- Open the cabinet door of the automatic transfer switch.
- Move the Motor Disconnect switch to the Off position.
- Transfer to Emergency: pull the upper manual operator handle down, then push the lower manual operator handle down.
- Retransfer to Normal: pull the lower manual operator handle up, then push the upper manual operator handle up.
- Move the Motor Disconnect switch back to the Auto position.
- Close the cabinet door.
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.