Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Cummins/Onan›Pairing the Key Fob

Cummins/Onan Onan P4500i / P4500 — Pairing the Key Fob

Operation · Remote start key fob

For the Cummins/Onan Onan P4500i / P4500, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan Onan P4500i, Cummins/Onan P4500

Procedure

  1. Ensure the battery is connected.
  2. Push the battery switch to the ON position.
  3. Press and hold the engine start/stop button for 10 seconds until the LED blinks green, then release it.
  4. Press and hold the ON button on the key fob for one second, then release it.
  5. If the key fob paired successfully, the LED around the engine start/stop button will turn solid green.
  6. After the key fob is successfully paired, turn the battery switch to the OFF position.

Full service-parts list: Cummins/Onan Onan P4500i →, Cummins/Onan P4500 →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →