Home›Repair guides›Cummins/Onan›Battery Maintenance

Cummins/Onan Onan P4500i / P4500 — Battery Maintenance

Maintenance

For the Cummins/Onan Onan P4500i / P4500, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan Onan P4500i, Cummins/Onan P4500

Parts for this job

Part numbers from the service-parts lists for Cummins/Onan Onan P4500i, Cummins/Onan P4500. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Plug the charger into the battery charging port on the control panel.
  2. Plug the wall receptacle end of the battery charger into a 120 Volt AC wall outlet.
  3. A red light on the charger indicates charging in progress; a green light indicates charging complete.
  4. Charge in a dry location.

Specs & values

  • Once started, the generator will charge the battery after 30–60 minutes of use

Full service-parts list: Cummins/Onan Onan P4500i →, Cummins/Onan P4500 →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →