Home›Repair guides›Cummins/Onan›Connect the Battery

Cummins/Onan Onan P4500i Inverter / P4500 — Connect the Battery

Installation

For the Cummins/Onan Onan P4500i Inverter / P4500, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan P4500

Parts for this job

Part numbers from the service-parts list for Cummins/Onan P4500. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Push down the battery access cover tab and pull the cover forward to remove it.
  2. Verify the rubber battery strap is firmly securing the battery; hook it onto the mounting base if loose.
  3. Remove the cable tie securing the quick-connect battery plugs then push firmly to connect them.
  4. Align the tabs on the battery access cover and push to reinstall.

Full service-parts list: Cummins/Onan P4500 →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →