Cummins/Onan M-1600-2 — Checking Engine Oil Level
Maintenance
For the Cummins/Onan M-1600-2, from the Cummins/Onan operator's manual.
Browse Cummins/Onan generators & specs →
Before you start
- Do not check the oil level with the generator set running
- Too much oil can cause foaming and engine shutdown
Procedure
- Remove oil level indicator and wipe with clean rag
- Reinstall indicator to normal operating position (fully in)
- Unscrew indicator again and check oil level on stem
- Add oil until it reaches the FULL mark; do not overfill
Tools required
- clean rag Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Fill to FULL mark on oil level indicator
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.