Home›Repair guides›Cummins/Onan›LPG Fuel Filter Cleaning

Cummins/Onan — LPG Fuel Filter Cleaning

Maintenance

From a Cummins/Onan service manual — check it applies to your exact model before use.

Applies to: Cummins/Onan NHEL

Before you start

  • LPG is flammable and explosive.

Parts for this job

Part numbers from the service-parts list for Cummins/Onan NHEL. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Purge LPG system before disassembly.
  2. Remove four capscrews and lock washers holding bowl.
  3. Separate bowl from body and discard O-ring.
  4. Remove nut and washer from center stud.
  5. Pull out filter element.
  6. Wash element in kerosene and blow dry with 30 psi air.
  7. Wipe magnet clean.
  8. Install clean element with new gaskets and new O-ring.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Cummins/Onan NHEL →

Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →