Cummins/Onan — Inspection And Service

A Cummins/Onan service procedure — check it applies to your exact model before use.

Browse Cummins/Onan generators & specs →

Procedure

1. 1. Unscrew and remove governor stop pin and
2. 2. Loosen the governor arm nut and slide the
3. 3. Remove the retaining ring and washer from the
4. 1. Remove the screws, lockwashers, and “L”
5. 2. The upper and lower bushings and needle bear-

Source: manual:TP2043 Kohler Engine Service KT17 KT19 KT21 (05-1984).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.