Cummins/Onan GST30 G-Drive / QST30 G-Drive — Specify a new group of parameters to monitor
Operation · Monitor Setup
For the Cummins/Onan GST30 G-Drive / QST30 G-Drive, from the Cummins/Onan service manual.
Applies to: Cummins/Onan QST30 G-Drive engine
Procedure
- Click Monitor on the Tools menu.
- Add parameters to the Selected Parameters box using the Add button.
- Click the Set button to save the setup as a .cfg file.
- Click OK to start monitoring.
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.