Cummins/Onan GST30 G-Drive / QST30 G-Drive — Monitor data
Operation
For the Cummins/Onan GST30 G-Drive / QST30 G-Drive, from the Cummins/Onan service manual.
Applies to: Cummins/Onan QST30 G-Drive engine
Procedure
- Specify which parameters to monitor.
- Make sure the ECM is attached to your PC and the engine is running.
- Click the Start button.
- Click Pause then Start to pause/resume; click Capture to log data; click Close to stop.
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.