Cummins/Onan — Governor Actuator Stator and Base Assembly − Remove And Install
Repair & overhaul
From a Cummins/Onan service manual — check it applies to your exact model before use.
Applies to: Cummins/Onan HDKA, Cummins/Onan HDKAJ, Cummins/Onan HDKAK
Procedure
- Step 01 (0.5 hr): disconnect and connect battery cables
- Remove and install governor cover, governor spring, mounting screws, bearing carrier assembly, governor stator assembly
- Step 02 (1.0 hr): perform steps in 01
- Remove and install O-ring, governor rotor, governor base mounting screws, governor base and gasket
- Check/reset high speed idle
Specs & values
- SRT 05-1AB
- Step 01: 0.5 hours
- Step 02: 1.0 hours
Full service-parts list: Cummins/Onan HDKA →, Cummins/Onan HDKAJ →, Cummins/Onan HDKAK →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.