Cummins/Onan TS1310 — Service Procedure

For the Cummins/Onan TS1310.

Applies to: Cummins Onan Ts1310

Procedure

1. 1. This indicator blinks at two times per second rate during the two seconds that the Test button is pressed to acknowledge that a test has been activated or when the remote test input is grounded.
2. 2. The indicator lights constantly during the test and goes out once the test is termi- nated or normal power has failed.
3. 3. The indicator blinks at two times per second rate during the two seconds to ac- knowledge that the Test button has been pressed to cancel a Test. The light then goes out.

Source: manual:962-0522 Cummins-Onan RSS100 RSS200 Transfer Switch Service Manual (01-2008).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.