Cummins/Onan — Generator - Replacement
Repair & overhaul
From a Cummins/Onan service manual — check it applies to your exact model before use.
Browse Cummins/Onan generators & specs →
Procedure
- Disconnect battery negative cable.
- Remove drive belt.
- Remove 2 bolts and position the generator aside.
- Disconnect electrical connector.
- Remove generator.
- Install: tighten generator bolts to 25 Nm (18 lb-ft), B+ terminal to 8 Nm (71 lb-in).
Specs & values
- Generator bolts 25 Nm (18 lb-ft)
- B+ terminal 8 Nm (71 lb-in)
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.