Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Installation

Cummins/Onan RBAA — Installation

For the Cummins/Onan RBAA.

Applies to: Cummins Onan Rbaa

Procedure

  1. Disconnect all hydraulic lines and wiring from
  2. Remove the enclosure assembly and the fan
  3. Disconnect the hydraulic line between the mo-
  4. Disconnect the field leads from the voltage reg-
  5. Remove the four nuts that secure the generator
  6. Thread the lifting eye into the top of the genera-

Source: manual:943-0502 Onan RBAA Hydraulic Genset Service manual (02-2005).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.