Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›check that each brush is being held off the slip

Cummins/Onan — check that each brush is being held off the slip

For these Cummins/Onan models: 3.6MKY, 4MKY.

Applies to: Cummins Onan 3 6Mky, Cummins Onan 4Mky

Procedure

  1. Disconnect the starter bracket from the rear of
  2. Pull outward on the r
  3. 7/8 inches (200 mm) long by 0.45 inches
  4. Wear gloves to protect hands from sharp

Specs & torque values

  • (11 mm) in diameter into the rotor through bolt
  • hole (Figure 7-4). Thread a 9/16-12 x 1 inch
  • 7-7/8 inches (200 mm) long by 0.45 inches

Source: manual:981-0531 Onan MKY Spec J Pontoon Service Manual (8-1999).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.