Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Remove the outer housing panels (Figure 4-2) to

Cummins/Onan HDZAA — Remove the outer housing panels (Figure 4-2) to

For the Cummins/Onan HDZAA.

Applies to: Cummins Onan Hdzaa

Before you start

  • Secure the generator set to the vehicle structure
  • have to be bent to line up with the holes in the vehicle
  • frame.
  • ter.
  • with the mounting holes in the generator set mount-
  • It is critical for good vibration isolation that the
  • with four (4) Grade 5 bolts of at least 3/8 inch diame-
  • four bolt holes in the vehicle frame line up accurately
  • ing brackets so that the vibration isolators do not

Procedure

  1. 2
  2. 3
  3. 4
  4. Phase, 60 Hz, 120 VAC output from the generator

Source: manual:983-0502 Onan HDZAA (spec A-B) Diesel Genset Service manual (06-2010).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.