Cummins/Onan — Service Procedure

For these Cummins/Onan models: DKG, RGA-IN1.

Applies to: Cummins Onan Rga In1

Procedure

1. Inspect all wires for breaks, loose connections,
2. Remove wires from terminals at each end and
3. Using an ohmmeter, check each wire to other
4. Reconnect or replace wires/harness accord-

Source: manual:981-0511 DKG RV Service (2-1994).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.