Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Service Procedure

Cummins/Onan — Service Procedure

For these Cummins/Onan models: DKG, RGA-IN1.

Applies to: Cummins Onan Rga In1

Procedure

  1. Stop the generator set and disconnect the
  2. Unscrew the voltage regulator from the AC
  3. Unplug the regulator from the wiring harness.
  4. Remove the mounting screws from the old
  5. Reconnect the plug connection to the wiring

Source: manual:981-0511 DKG RV Service (2-1994).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.