Cummins/Onan — Disassembly/Reassembly 8-1
For these Cummins/Onan models: 10CCFO, 10CCO, 7CCFO, 7CCO.
Browse Cummins/Onan generators & specs →
Procedure
- 3. Remove the mounting screws securing the
- 1-932
- 4. Disconnect the 22-pin controller harness (P4)
- 1-932
- 8-2 Disassembly/Reassembly
- 5. Loosen the screws on the junction box cover using
- 1-932
- 6.
- 10.
- 11.
- 12.
- 13.
- 14.
- 1-932 1-932
- 15. Remove the bolts from the two generator
- 17. Remove the four over-bolts securing the end
- 1-932
- 1-932
- 16. Place the hoist hook into the generator hoisting
Source: manual:TP5595 Kohler Gen Service 7CCO 10CCO Kubota (05-1993).PDF. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.