Cummins/Onan — Connect the INLINE™5 Datalink Adapter to a Personal Computer
Installation
From a Cummins/Onan service manual covering: B5.9, B5.9LPG, L10, L10 Gas, M11, N14, QSB3.9, QSB4.5, QSB5.9, QSB5.9 Marine, QSC8.3, QSK19…. Check it applies to your exact model before use.
Browse Cummins/Onan generators & specs →
Before you start
- A fully populated USB cable, Part Number 4918419, or DB9F-DB9M serial cable, Part Number 4918418, must be used.
Procedure
- Connect the DB9F-DB9M serial cable, Part Number 4918418, or USB cable, Part Number 4918419, to the computer.
- Connect the other end of that cable to the INLINE™5 datalink adapter, Part Number 3165033.
- Supply +8 VDC to +50 VDC at 250mA through the OEM connector or a separate power source.
- Connect the appropriate datalink cable to the INLINE™5 datalink adapter, Part Number 3165033.
- Connect the other end of the datalink cable to the vehicle cab or engine compartment datalink connector.
- Launch the electronic service tool application software.
Specs & values
- A fully populated USB cable, Part Number 4918419, or DB9F-DB9M serial cable, Part Number 4918418, must be used
- +8 VDC to +50 VDC at 250mA FridayParts $352.25
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.