Cummins/Onan CK-216E — Operation Of Gaseous Fuel Plants
Operation · Fuel system
For the Cummins/Onan CK-216E, from the Cummins/Onan service manual.
Browse Cummins/Onan generators & specs →
Procedure
- Shut off gasoline supply at fuel filter and run engine dry.
- Lock float by turning in locking screw above gasoline idle adjusting screw.
- Lock choke plate in wide open position.
- Prime by momentarily pushing priming button on gas regulator.
- Run plant until operating temperature.
- Adjust main gaseous adjustment screw for smoothest full load operation.
- Adjust idle gaseous adjustment screw until engine runs smoothly at no load.
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.