Cummins/Onan CK-216E — Flywheel Removal
Repair & overhaul
For the Cummins/Onan CK-216E, from the Cummins/Onan service manual.
Browse Cummins/Onan generators & specs →
Procedure
- Remove parts necessary to expose flywheel.
- Turn flywheel mounting screw out two full turns.
- Insert screwdriver between flywheel and gear cover to take up end play.
- Strike sharp endwise blow on cap screw head with heavy soft hammer.
- Remove flywheel carefully to avoid damaging magneto stator.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Flywheel capscrew torque 40 to 45 pound feet
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.