Cummins/Onan — GOVERNOR LINK

For these Cummins/Onan models: Contractor, UN Revolving Armature, 4-Pole.

Applies to: Cummins Onan Contractor

Procedure

1. Recheck the speed adjustment made in step #4.
2. Set the carburetor throttle stop screw as des-

Source: manual:940-0120 Onan NH (spec P) Genset Operators manual (10-1983).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.