Home›Repair guides›Cummins/Onan›Battery Connection (Starting Motor)

Cummins/Onan — Battery Connection (Starting Motor)

Installation · battery / starter

From a Cummins/Onan operator's manual covering: 5JB, 601JB, 6JB, 6OLJB, 705JB, 705JB-3, 705JB-3CR, 705JB-4XR, 706JB, 7JB. Check it applies to your exact model before use.

Browse Cummins/Onan generators & specs →

Before you start

  • If battery polarity is wrong, damage occurs within 3 minutes stopped or 5 seconds running

Procedure

  1. Connect battery positive (+) to starter engaging solenoid terminal post.
  2. Connect battery negative (-) to a good ground on the engine.
  3. Begin Spec P: negative battery ground only.

Specs & values

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →