Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Battery Charger Wall Mounting

Cummins/Onan CHG-4 — Battery Charger Wall Mounting

For the Cummins/Onan CHG-4.

Applies to: Cummins Onan Chg 4

Before you start

  • Verify no utilities are behind wall before drilling.

Procedure

  1. Check the mounting location to be sure that no wiring, plumbing, gas or exhaust lines are located behind the wall.
  2. The charger ammeter should preferably be at about eye level.
  3. Hold the charger in the mounting position and scribe the mounting hole locations on the wall.
  4. Drill pilot holes if needed and secure the charger with #10 mounting screws.

Tools required

  • Drill
  • Screwdriver
  • #10 mounting screws

Specs & torque values

  • #10 mounting screws

Source: manual:901-0604 Onan 305-0856 Charger Install Manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.