Cummins/Onan — Adjust gasoline carburetor
Adjustments
From a Cummins/Onan service manual covering: 10.0JC, 12.5JC, 15.0JC, 4.0JB, 5.0JB, 6.0JB, 6.1JB, 7.5JB, 7.6JB. Check it applies to your exact model before use.
Applies to: Cummins/Onan 10.0JC, Cummins/Onan 12.5JC, Cummins/Onan 15.0JC, Cummins/Onan 5.0JB, Cummins/Onan 6.0JB, Cummins/Onan 6.1JB, Cummins/Onan 7.5JB, Cummins/Onan 7.6JB, Cummins/Onan JB engine, Cummins/Onan JC engine
Before you start
- Do not force needle valves against seats
Procedure
- Allow engine to warm up
- At no load turn idle adjustment out until speed drops slightly
- Turn needle in until speed returns to normal
- Apply full load, turn main adjustment in until speed drops
- Turn needle out until speed returns to normal
Tools required
- Screwdriver Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Open needle valves 1 to 1-1/2 turns off seat to start
Full service-parts list: Cummins/Onan 10.0JC →, Cummins/Onan 12.5JC →, Cummins/Onan 15.0JC →, Cummins/Onan 5.0JB →, Cummins/Onan 6.0JB →, Cummins/Onan 6.1JB →, Cummins/Onan 7.5JB →, Cummins/Onan 7.6JB →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.