Cummins/Onan — AC application (connecting appliances)
Operation · AC receptacles
From a Cummins/Onan operator's manual covering: PX4800, RGX2900, RGX3600. Check it applies to your exact model before use.
Browse Cummins/Onan generators & specs →
Before you start
- Make sure the appliance is switched OFF before connecting it to the generator.
- Do not move the generator while it is running.
- Be sure to ground the generator if the connected appliance is grounded.
Procedure
- Check the voltmeter for proper voltage.
- Turn off the switch(es) of the electrical appliance(s) before connecting to the generator.
- Insert the plug(s) of the electrical appliance(s) into the receptacle.
- Turn the AC circuit breaker to the ON position.
- Turn on the switch of the appliance.
Specs & values
- Receptacle amperage limits per TABLE 1: up to 30 amperes; up to 16 amperes; up to total 15 amperes from two receptacles; up to 15 amperes.
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.