Cummins/Onan 5.6TGHAA11381C — Genset Break-In
Operation · engine
For the Cummins/Onan 5.6TGHAA11381C, from the Cummins/Onan operator's manual.
Applies to: Cummins/Onan TGHAA
Procedure
- Run genset at 1/2 rated power for first 2 hours.
- Run genset at 3/4 rated power for next 2 hours.
- Check oil level twice a day or every 4 hours during first 24 hours.
- Change oil after first 50 hours of operation.
Specs & values
- Mobil 1 Formula 15W-50 synthetic motor oil or equivalent
Full service-parts list: Cummins/Onan TGHAA →
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.