Cummins/Onan 5.6TGHAA11381C — Checking Engine Oil Level
Maintenance
For the Cummins/Onan 5.6TGHAA11381C, from the Cummins/Onan operator's manual.
Applies to: Cummins/Onan TGHAA
Before you start
- Crankcase pressure can blow hot engine oil out the fill opening causing severe burns. Always stop the genset before removing the oil fill cap.
Procedure
- Shut off the genset.
- Remove oil fill cap/dipstick, wipe clean, screw back on, then remove again.
- Check oil level on dipstick.
- Add Mobil 1 Formula 15W-50 synthetic motor oil or equivalent until full mark.
- Do not fill above full mark; drain excess if overfilled.
- Screw oil fill cap on securely.
Specs & values
- Mobil 1 Formula 15W-50 synthetic motor oil or equivalent
- Oil capacity 3.3 L (3.5 quart) with filter
Full service-parts list: Cummins/Onan TGHAA →
Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.