Cummins/Onan 5.5 NH / 6.5 NH — Starting and Stopping (Electric Start)

Operation · generator set control

For the Cummins/Onan 5.5 NH / 6.5 NH, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan NH engine

Procedure

1. Push the Start/Stop switch on the control panel to the START position.
2. Release the Start/Stop switch as soon as the engine starts.
3. Use short starting cycles (2 to 3 seconds) to provide the longest battery life.
4. To stop, push the Start/Stop switch on the control panel to the STOP position.

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →