Cummins/Onan 1B Series — Adjusting the charging rate - DC units
Operation · Generator
For the Cummins/Onan 1B Series, from the Cummins/Onan owner's manual.
Browse Cummins/Onan generators & specs →
Procedure
- Start plant and connect load.
- Adjust amperage output slightly higher than connected load.
- Move manual throttle arm forward for higher charge.
- Move throttle arm opposite direction for lower charge.
Source: Cummins/Onan owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.