Cummins/Onan 1750DQKB — Frame 7 Bearing Removal
Repair & overhaul · frame 7 end bearing
For the Cummins/Onan 1750DQKB, from the Cummins/Onan service manual.
Applies to: Cummins/Onan 1750DQKB, Cummins/Onan DQKB, Cummins/Onan DQKC
Procedure
- Remove the endbracket (complete steps 1 through 21 of Main Stator and Rotor Removal, Frame 7).
- Remove the four screws holding the bearing cap.
- Remove cap.
- Remove circlip.
- Remove bearing cartridge housing complete with bearing.
Tools required
- Standard workshop tools
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Cummins/Onan 1750DQKB →, Cummins/Onan DQKB →, Cummins/Onan DQKC →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.