Cummins/Onan 1750DQKB — Entering Password
Operation · PowerCommand control
For the Cummins/Onan 1750DQKB, from the Cummins/Onan service manual.
Applies to: Cummins/Onan 1750DQKB, Cummins/Onan DQKB, Cummins/Onan DQKC
Procedure
- Display the submenu to modify.
- Press + or – button within the submenu; the Password menu appears.
- Press + and – to select the first password character (A–Z or 0–9). Enter Application password for Setup, User password for Adjust.
- Press → to select the next character field (highlighted).
- Repeat to enter the remaining password characters.
- Press Enter after entering the password; the selected submenu reappears.
- Exit the submenu to save changes.
Specs & values
- Password valid for only 10 minutes after last button press
- Application password initially set to GENSET
Full service-parts list: Cummins/Onan 1750DQKB →, Cummins/Onan DQKB →, Cummins/Onan DQKC →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.