Home›Repair guides›Cummins/Onan›Oil Filter Change

Cummins/Onan 12.0 RDJC — Oil Filter Change

Maintenance

For the Cummins/Onan 12.0 RDJC, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan RDJC

Parts for this job

Part numbers from the service-parts list for Cummins/Onan RDJC. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove filter by turning counterclockwise.
  2. Clean filter mounting area.
  3. Oil filter gasket and install new filter.
  4. Turn filter on clockwise until gasket touches mounting base, then tighten 1/2 turn.

Full service-parts list: Cummins/Onan RDJC →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →