Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›10-2009

Cummins/Onan — 10-2009

For these Cummins/Onan models: EGMBT, EGMBT (P4500), EGMBU, EGMBU (P5000E), EGMBU (P5000e), P24500 (Spec A), P5000e (Spec A).

Applies to: Cummins Onan Egmbt, Cummins Onan Egmbu

Procedure

  1. 4. Starting and Running the Generator Set No. Description No. Description 1 Choke Lever 3 Close 2 Open FIGURE 7. CHOKE ROD FIGURE 8. RECOIL START HANDLE
  2. 4.4 Stopping the Generator Set
  3. 1. Turn off or disconnect all tools and appliances.
  4. 2. Let the generator set run for a few minutes to cool down.
  5. 3. Stop the generator set by pressing and holding the On/Off switch in the Off position until the generator set stops.
  6. 4. Close the fuel valve. WARNING: Gasoline is highly flammable and explosive which can result in servere personal injury or death. Always close the fuel valve when the engine is not in use to reduce the risk of fuel spillage. 914-0508 (Issue 5) 17

Source: manual:914-0508 Onan EGMBT P24500 EGMBU P5000e (spec A) Portable Genset Service manual (10-2009).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.