Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Procedure 8

Cummins — Procedure 8

For these Cummins models: GTA38, GTA38, GTA50, GTA50.

Browse Cummins generators & specs →

Procedure

  1. 9. Install the flat washer, lock washer, and cap-screw in
  2. the lower end of the shock absorber.
  3. 10. Install the shock absorber on the fan idler arm.
  4. 11. Tighten the two cap-screws

Source: manual:Cummins Gas GTA38-50 Manual 1999 (2).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.