Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›4. Remove the four 3/8 “ mounting boits.

Cummins — 4. Remove the four 3/8 “ mounting boits.

For these Cummins models: GTA38, GTA38, GTA50, GTA50.

Browse Cummins generators & specs →

Procedure

  1. 2. Install lower gasket, Flo-Tech Actuator, upper gasket
  2. and upper air adapter with four 3/8” bolts and washers.
  3. Torque Value: 42 Nem [31 ft.-ib.]
  4. 3. Install intake air pipe from the air adapter to the
  5. Aftercooler asembly and install all hose clamps.
  6. 4, Reconnect electrical pulg to actuator.

Tools required

  • and upper air adapter with four 3/8” bolts and washers.
  • 3. Install intake air pipe from the air adapter to the

Source: manual:Cummins Gas GTA38-50 Manual 1999 (2).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.