Cummins — 60210007 Spark Plug Removal 13/16 inch

For these Cummins models: GTA14, GTA14 qi 20 NA.

Procedure

1. Read & follow the manufacturer’s manuals, to decide
2. Test the condition of the batteries before each use.
3. Check the condition of the filter material on the back
5.Connect the temperature reducing tubing to the
10. After each 5 minutes of sampling, purge the unit with
11.
2. Adjust the power valve on the carburetor.
3. After each adjustment of the power valve it will be
1. Apply liquid soap around the regulator to check for
2. Check for leaks at all line connections by applying liq-
3. On CNGE turbocharged engine models, check the throt-
1. Loosen the lock nut that secures the idler pulley to the
2. Turn the adjusting screw to adjust the v-ribbed belt
3. Rotate the crankshaft one revolution to allow the belt
4. Secure the idler pulley in position by tightening the
1. Fixed number of hours or calendar time, whichever
2. Utilization of a detailed oil analysis program.
1. Operate the engine until the water temperature

Source: manual:Cummins Gas GTA14 Manual 1998 (2).pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.