Craftsman Marine — To Remove the Flue
Maintenance
From a Craftsman Marine owner's manual — check it applies to your exact model before use.
Browse Craftsman Marine generators & specs →
Procedure
- Unscrew and remove the exhaust silencer (F).
- Detach the 3/16 inch copper tube connector (C) from the steam gauge at the ferrule nearest the gauge.
- Apply inward pressure at either side of the flue at points (1) and (2) with a screwdriver to collapse the side walls.
- Lift the flue up over the pans it houses.
- To replace the flue, reverse the above steps.
Tools required
- screwdriver Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 3/16 inch copper tube connector
Source: Craftsman Marine owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.